The Standard Door Surround(SDS) from Exitex suits inward opening doors and windows. This draught excluder for doors features an aluminium carrier with a tough flexible weather energised TPE gasket which allows for 3mm of door movement at all temperatures. The Exitex door surrounds are complete with ready mitred corners for perfect finish and a stainless steel screw slot fixing for perfect adjustment.
FINISH
Gold
MATERIAL
Aluminium and TPE Gasket
INSTALLATION
- The door should be in the closed position. Remove rubber seals from aluminium sections.
- Measure the short piece of aluminium to fit across the top of the door frame.
- Cut rubber seal to length and insert into aluminium. Nail or screw into position.
- Measure from fitted top strip to door bottom, and cut the side pieces to the length required.
- Use a fine tooth hacksaw, cut both pieces at an angle to give a 45 degree mitre. Important leave sealing blade 12mm (1/2″) longer.
- Using a pair of pliers nip the bottom of the gasket retaining channel to keep the seal in place after insertion.
- Place the side sections against the door and nail or screw into position.Ā On hardwood frames first make a pilot hole with a bradawl or small drill, in the centre of the slots.
- IMPORTANT If screw fixing is provided, “Posi” slotted type screws are supplied for safe and easy installation, use a No.1 screwdriver.
REFERENCE NUMBER
0062
DIMENSIONS
5180mm
